The Quick Serve-200 (QS-200) is a residential dumbwaiter designed to quickly and safely transport small cargo between multiple levels of a house. This unit is not intended to transport human beings or live cargo.

Dumbwaiters are a great solution when space is limited or budget restrictions prohibit the installation of a complete elevator.

Our dumbwaiters are easy to install and utilize “cat5” cables to easily connect the buttons and switches.

In certain jurisdictions, these units can be installed by a homeowner or general contractor who has above average mechanical skills.

To determine the size of your dumbwaiter, first:

  • Are you building a shaft to fit the dumbwaiter?
  • Or does the dumbwaiter need to fit an existing shaft?

Next, use the chart in this document to determine shaft width and depth based on desired cab size, or vice versa.

We specialize in custom dumbwaiter cab sizes and most likely have already built one for another customer!! Custom sizes available to the nearest inch. Some restrictions apply due to code restrictions and mechanical limitations.

No extra charge for custom sizes!

Top Motor mount shown to the left…

Best for:

  • Flood prone areas
  • Low loading heights on ground floor

Bottom motor mount shown to the right…

  • Overhead restrictions
  • Floor level loading desired at top floor

Modern membrane style call buttons (similar to those found on microwaves, refrigerators, and ovens) create a simple, clean look that complement most interiors.

Our call/send buttons are easily wiped clean to eliminate the worry of germs or grime on the surface.

 

 

Standard White Laminate Car:

  • Very durable and easy to clean
  • Bi-parting doors keep cargo secure
  • Quick and easy to assemble!
  • Custom sizes are available in 1” increments. (with some limitations)
  • Also available in Oak, Cherry, Mahogany or Maple plywoods, either unfinished or pre-finished.

Stainless Steel Cars:

  • 304 grade stainless steel, #4 brush finish
  • Ultimate in durability!
  • Standard and custom sizes available!

The QS-200 comes with a 2 year warranty on all parts and components.

See warranty document for further details.

MSRP $3295

  • Car Configuration – As Viewed From Bottom Landing
    • Single Opening – Right

      $0.00

      Single Opening - Right

    • Single Opening – Left

      $0.00

      Single Opening - Left

    • Single Opening – Front

      $0.00

      Single Opening - Front

    • Straight Through

      $450.00

      Straight Through

    • 90 Degree Cars only in Wood Materials and in the 3 Standard Sizes

      $0.00

      Straight Through

    • 90 Degree – Right

      $1,015.00

      90 Degree - Right

    • 90 Degree – Left

      $1,015.00

      90 Degree - Left

  • Stops
    • 2 Stops

      $0.00

      No Image

    • 3 Stops

      $555.00

      No Image

    • 4 Stops

      $1,080.00

      No Image

  • Car Material Selection
    • Laminate or Veneer

      $0.00

      No Image

    • Stainless Steel (Skip down to “Stainless Steel Car Options”)

      $0.00

      No Image

  • Car Material – Laminate or Stain Ready Veneer
    • White Laminate

      $0.00

      No Image

    • Unfinished Maple

      $0.00

      No Image

    • Unfinished Cherry

      $185.00

      No Image

    • Unfinished Mahogany

      $185.00

      No Image

    • Unfinished Oak

      $185.00

      No Image

  • Car Finish Options for Wood Species
    • Leave Wood Car Material Unfinished (Stain Ready)

      $0.00

      No Image

    • Clear Coat Finish for Car

      $346.00

      No Image

    • Standard Stain for Car – Natural 209 (Includes Clear Coat)

      $692.00

      No Image

    • Standard Stain for Car – Sedona Red 222 (Includes Clear Coat)

      $692.00

      No Image

    • Standard Stain for Car – Classic Gray 271 (Includes Clear Coat)

      $692.00

      No Image

    • Custom Stain for Car (Includes Clear Coat)

      $846.00

      No Image

    • Custom Stain for Car (enter exact MINWAX stain #)

      $0.00

      No Image

    • 8″x8″ Samples Available (Standard Shipping Rates Apply)

      $0.00

      No Image

  • Car Width & Depth (Inside Clear) – Laminate or Veneer
    • All Dimensions are Inside Clear

      $0.00

      No Image

    • Capacity: 200 Lbs. for Car up to 24″W and 24″D – 300 Lbs. for Car Over 24″W and/or 24″D

      $0.00

      No Image

    • 20″W x 20″D – Standard

      $0.00

      No Image

    • 24″W x 24″D – Standard

      $0.00

      No Image

    • 30″W x 30″D – Standard – 300 Lb. Capacity

      $650.00

      No Image

    • * Refer to the Technical Drawing Document to See Available Custom Options *

      $0.00

      No Image

    • Custom – Smaller than 20″W x 20D (Enter Dimensions Below) – Additional Lead Time Required

      $0.00

      No Image

    • Custom – Larger than 20″W x 20D (Enter Dimensions Below) – Additional Lead Time Required

      $125.00

      No Image

    • Custom Oversize – Over 24″W and/or Over 24″D (Enter Dimensions Below) – 300 Lb. Capacity – Additional Lead Time Required

      $650.00

      No Image

  • Stainless Steel Car Size Options
    • No Stainless Steel Car (make Car Material Selection above)

      $0.00

      No Image

    • 304 Grade Stainless Steel, #4 Brushed Finish (Dimensions are Inside Clear)

      $0.00

      No Image

    • Additional Lead Time Required

      $0.00

      No Image

    • Stainless Steel – 20″W x 20″D x 30″H – 200 Lb. Capacity

      $1,895.00

      No Image

    • Stainless Steel – 24″W x 24″D x 30″H – 200 Lb. Capacity

      $2,019.00

      No Image

    • Stainless Steel – 30″W x 30″D x 36″H – 300 Lb. Capacity

      $2,548.00

      No Image

    • Custom Stainless Steel Cars can add up to 6 weeks to build time

      $0.00

      No Image

    • Custom Stainless Steel Car – Up to 24″ Wide or Deep (enter dimensions below)

      $4,080.00

      No Image

    • Custom Stainless Steel Car – Over 24″ Wide or Deep (enter dimensions below)

      $4,080.00

      No Image

  • Custom Car Width & Depth (Inside Clear) – All Materials
    • * Refer to the Technical Drawing Document to See Available Custom Options *

      $0.00

      No Image

    • Inside Clear Dimensions are in Whole Inches Only

      $0.00

      No Image

    • Width (min. 14″ – max. 30″)

      $0.00

      No Image

    • Depth (min. 14″ for Rear Rail / min. 17″ for Side Rail – max. 30″)

      $0.00

      No Image

  • Car Height (Inside Clear) – All Materials
    • 30″ High

      $0.00

      No Image

    • 36″ High

      $0.00

      No Image

  • Call-Send Control Options
    • “Car Here” Indicators (Included)

      $0.00

      No Image

    • Keylocks (per lock)

      $93.00

      No Image

  • Options
    • Automatic In-Car Light

      $340.00

      No Image

    • Float Level Switch

      $400.00

      No Image

    • Machine Room Access Door – Kill Switch

      $93.00

      No Image

    • Gate Switch on Car Gate

      $340.00

      No Image

    • No Door & No Track (Not Recommended – Only for Low Overhead Space Installs)

      $0.00

      No Image

    • Second Shelf – Laminate or Veneer

      $93.00

      No Image

    • Second Shelf – Stainless Steel

      $116.00

      No Image

    • Straight Through and 90 Degree Cars with Multiple Openings on the Same Landing May Require Additional Locks and Call/Send

      $0.00

      No Image

    • Additional Right Hand Locks Required (One Provided Per Landing)

      $269.00

      No Image

    • Additional Left Hand Locks Required (One Provided Per Landing)

      $269.00

      No Image

    • Additional Call / Send Required (One Provided Per Landing)

      $85.00

      No Image

  • Drive Machine Location
    • Mount at Bottom (Recommended)

      $0.00

      No Image

    • Mount at Top

      $0.00

      No Image

  • Total Travel
    • Up to 12′

      $0.00

      No Image

    • 12′ To 18′

      $185.00

      No Image

    • 19′ To 29′

      $400.00

      No Image

    • 30′ To 40′

      $555.00

      No Image

    • 41′ To 51′

      $710.00

      No Image

  • Drawings
    • Generic Approval Drawings Included

      $0.00

      No Image

    • Job Specific Approval Drawings (Generic Drawings are Supplied at no cost)

      $310.00

      No Image

    • E-Mail Address for Approval Drawings (required to get drawings)

      $0.00

      No Image

  • Shipping Options
    • Factory Pickup

      $0.00

      No Image

    • Customer Coordinated, F.O.B. Factory

      $0.00

      No Image

    • Flat Rate LTL Shipping to Commercial Location

      $800.00

      No Image

    • Flat Rate LTL Shipping to Residential Location

      $1,000.00

      No Image

  • Fees
    • Florida Tax for Dumbwaiters sold to FL Customers

      $350.00

      No Image

  • Capacity: 200 lbs.  (Optional 300lbs.)
  • Speed: 32 FPM, Nominal
  • Drive: Chain drive – continuous loop, no counterweights
  • Operation: Automatic operation, Manual Doors
  • Control System: PLC Logic, 24 VDC Locks, Buttons, Switches. 100% Plug ‘n’ Play
  • Door Interlocks: Electromechanical, locks hall doors and prevents operation when door is open
  • Car Gate: Bi-Parting
  • Hall Doors: Swing Style, By Others
  • Car Material & Finish: Standard White Laminate, Optional Hardwood Veneer or Marine Grade Plastic
  • Car Frame: Aluminum with roller guides and broken cable safeties
  • Guide Rail: Aluminum channel
  • Standard Car Size: 20″W x 20″D x 30″H
  • Custom Min-Max Car Sizes: Minimum- 16″w x 16″d x 30″h
  • Maximum w/ side rail mount: 24″w x 30″d x 30″h
  • Maximum w/ rear rail mount: 30″w x 24″d x 36″h
  • Oversized Car Option:  >24″w, >30″d, up to 36″h = totals up to  21 cubic feet
  • Travel Distance: Up to 4 landings, Max travel 51′
  • Machine Mount location: Top or Bottom, Access Hatch (by others) Required
  • Electrical Requirements: 120 VAC, 15 amp circuit.
  • Safety: ETL Listed
  • Warranty: 2 years
Below is an assortment of sample drawings. Determine how you intend to load and unload your dumbwaiter (front loading, front and rear or 90 degree), then select the group and scroll through the sample drawings.

Remember, we will custom build (within 1″) the size you need at no additional charge!!! (Some size restrictions) If you don’t see the size you need call us for more info!

Recommend Door Sizes

90 Degree

Pass Through

Same Side

Please email dumbwaiters@pli-team.com for specific information for your area.

GET A FREE QUOTE
  • This field is for validation purposes and should be left unchanged.